Ipe Siding - A Cost Effective Solution For Decking and Backing Material
Ipe siding is very popular because of its natural look and charm. Ipe siding is basically a composite of copper and tin which are ground together under pressure. Ipe siding contains rich natural color which can be improved further by an additional oil stain or it can even be left to weather naturally to an antique grey. It is also a very affordable option which can be used on homes which have a vintage look or one which is in a traditional style. There are a few things which need to be considered when using Ipe siding on a new home. The first thing to consider is whether to use a bonded ipe board or a floating ipe board. It is important to note that floating ipe boards are more expensive than bonded ones and tend to last longer, however, the drawback is that the boards cannot be easily nailed down to the wall and need to be cut to size before installation.
Installing ipe siding on a new home will be simpler if the existing wall is flat with a few bumps around the edge. If the wall slopes towards the door opening then the best approach is to install ipe board on the inside of the wall and leave the outside as it is. This will result in less work and more durability because the boards will run lengthways along the exterior of the wall, where they will be attached to the front and back. For this approach there are no gaps or ridges along the outside of the wall as with the flat run type. See the ipe decking cost here!
Once the ipe siding is attached to the external wall it will look just like any other siding except for the difference in color. The siding prices are lower for this approach than for paneled or tile roofing but it does give the home the appearance of more space as well as adding value to the property. Prices start at around thirty five dollars per square foot for the basic shiplap siding, which can be installed by a professional or with the homeowner following instructions for proper fitting. The cost increases depending on the number of boards required. It also depends on whether the home is single or multi-story and the amount of work needed to change out all the windows. A small ranch house could take only four or five boards depending on the style. Discover more facts about decks at https://www.britannica.com/technology/harbor. Installing ipe siding over other types of wood siding will require different fastening system, depending on the type of wood used. For example, cedar has its own distinctive characteristics that should be taken into account.
Fasteners such as nails and screws will have to be used for cedar and teak so you would not want to use fasteners for aluminum or vinyl siding. There are many different companies that supply the fastening system so it shouldn't be difficult to find one close enough for the job. Ipe siding can be an attractive alternative to standard cedar wood siding when it is properly installed. This low cost siding will last for years if it is properly maintained. It comes in a variety of styles and colors making it ideal for use on decks, patios or as backings to porches. With modern technology it is possible to enjoy many decades of low maintenance in such a cost effective manner.
